418 plant & equipment hire suppliers · 15 machine classes · 56 locationsIndependent Australian hire directory

Machine type MC-02

Compaction Equipment Hire in Australia

Smooth-drum, padfoot and pneumatic rollers, plate compactors and rammers for fill, subgrade and asphalt.

Compaction Equipment Hire: machinery working on an Australian project
29Listed suppliers
8States covered
NSWMost suppliers
6Machine groups

Compaction equipment turns placed fill, subgrade, base course and asphalt into a surface that meets its specification. The choice is set by material type, lift thickness, working width and how the result will be tested. A roller that is too light will not reach density. One that is too heavy or vibrating at the wrong setting can damage services, structures and freshly laid asphalt.

01 · The fleetCommon compaction equipment options

MachineBest suited to
Plate compactors & rammersTrench backfill, paving bedding and small areas. Rammers (jumping jacks) suit cohesive soils in narrow trenches.
Walk-behind & trench rollersNarrow trenches and confined areas where ride-on rollers cannot operate.
Smooth-drum vibrating rollers (1–20 t)Granular fill, base course and asphalt. Drum width and amplitude settings matter.
Padfoot rollersClay and cohesive soils where kneading action is needed to reach density.
Multi-tyred (pneumatic) rollersAsphalt finishing and sealing work, and proof-rolling subgrade.
Compaction wheels (excavator-mounted)Deep trench backfill without placing people in the trench.

02 · ApplicationsWhat it's hired for

  • Road base and subgrade preparation
  • Asphalt laying and patching
  • Trench backfill for services
  • Building pads and slab preparation
  • Car parks and hardstands
  • Dam walls and embankments

03 · PricingWhat affects the hire rate

Hire rates for compaction equipment vary by supplier, location and season. A lower daily rate can cost more once transport, minimum hours and extras are added. Compare quotes on these drivers:

  • Roller weight and drum configuration
  • Operated or dry hire
  • Water cart or water tank requirement
  • Transport (larger rollers need a float)
  • Night or traffic-staged works
  • Test and verification method required

See how to compare machinery hire quotes on equal terms.

Before you call

Tell the supplier the material, lift thickness, area and test standard (e.g. density ratio or proof-roll). That decides roller type far more reliably than naming a weight.

FAQCompaction Equipment Hire FAQs

Smooth drum or padfoot roller?

Smooth-drum rollers suit granular materials, gravels and asphalt. Padfoot rollers suit clays and cohesive soils where kneading is needed. Many earthworks jobs use a padfoot for bulk fill and a smooth drum for finishing.

How thick can each compaction layer be?

It depends on the material, the roller and the specification. Many earthworks specifications limit loose layers to roughly 150–300 mm. Follow the project's geotechnical specification and confirm with test results.

Can vibration damage nearby structures?

Yes. Vibration can affect services, retaining walls, heritage structures and neighbouring buildings. Use lower amplitude or static passes near sensitive assets, and monitor vibration where the project requires it.

GuidesRelated selection guides

Supplier directory

Compaction Equipment Hire suppliers by state

29 listed suppliers. Confirm the dispatch depot, fleet and service coverage for your site directly with each company.

Compaction Equipment Hire: Australian Capital Territory (3)

Compaction Equipment Hire: New South Wales (10)

Compaction Equipment Hire: Northern Territory (4)

Compaction Equipment Hire: Queensland (7)

Compaction Equipment Hire: South Australia (2)

Compaction Equipment Hire: Tasmania (5)

Compaction Equipment Hire: Victoria (3)

Compaction Equipment Hire: Western Australia (4)